Master Series

MCU Silver

Master Series Permanent Rust Sealer

For More Information


Master Series Permanent Rust Sealer / Primer Surfacer - Silver is one of the most powerful primers ever developed by the industrial coatings business.  MCU Silver is a moisture cured urethane which stops rust on contact and levels heavy pitting.  It is moisture proof and is the only type of primer that is airtight and may be used with any type of paint.  Anywhere that rust is a problem - Master Series will prevent the reappearance of rust.  MCU Silver has been used on everything from bridges to antique vehicles and has outperformed similar products in marine salt spray tests.

 
MCU Black    

Master Series Chassis Coating

For More Information

 Master Series Chassis Coating/Black is an extremely tough, chip resistant chassis and firewall paint.  MCU Black is a very high gloss, one part urethane rust preventative.  If desired, this coating can be applied directly over wire brushed rust.  MCU Black may be applied either by spraying or with a polyester brush.  There is never a brush mark with this chassis paint and it dries to a glasslike finish.  This coating was designed for areas such as frames, floor pans, springs, underneath vehicles and interiors.  This coating is not UV stable and so would not be used in areas that are subject to sunlight.

AG 111 High Performance

Master Series AGIII High Performance System

For More Information

 AG 111 is a two part aliphatic specialty blend urethane.  It has non-yellowing, non-chalking properties combines with excellent gloss retention and will retain a high gloss through many years of service.  It is suggested, therefore, as a high performance finish in many areas.   

MCT-101 Thinner - Solvent is the solvent specially designed for use with the AG 111 finishing system.
Hot Jet Ceramic High Heat Paint

High Heat Paint

For More Information

 This High heat jet turbine ceramic coating - is a do it yourself approach to coat headers and manifolds.  The coating can air dry or be oven cured at temperatures of 226°F up to 1000°F.  A 4 oz. bottle of High Heat Ceramic will coat 4 entire manifolds and an 8 oz. bottle of High Heat Ceramic will coat a set of headers. 
Top of Page
About Us Contact Us Privacy Policy FAQ'S
Event Schedule Distributorship Affiliates Home Restoration

Contact: Webperson  with questions or comments about this web site.   To order by phone call  800-343-9763
 Last modified: 10/27/12  All PRICES QUOTED IN U.S. DOLLARS
Copyright © 2003-2012  by Halon Marketing, LLC  All rights reserved.